Rust Repair and Welding for Wimbledon Classic and Older Cars

Wimbledon has its share of older and classic cars kept for the pleasure of driving them, and rust is usually their biggest enemy. Our Hackbridge workshop is about 20 minutes from Wimbledon, and we repair corrosion carefully with new steel, and can collect the car.

  • ★★★★★ 4.9/5 from 193 Google reviews
  • ~20 min from Wimbledon
  • Mon–Fri 8am–8pm · Sat 8am–5pm
Car raised on the ramp for underbody inspection at KITH Cars Garage & Bodyworks, Hackbridge

Classic and cherished Wimbledon cars: welding done carefully

Among the newer SUVs and EVs, Wimbledon has plenty of older and classic cars: a well-kept roadster brought out for weekends, an older estate kept on because it's paid for and reliable. Around Southside House, the Village and out towards Raynes Park, these cars often spend long periods parked. Controlled parking zones cover most of the town centre and the Village, and a car that sits for weeks, especially under a cover that traps moisture, can rust faster underneath than one in daily use.

Older cars were also built with less corrosion protection than modern ones, so sills, floor pans, inner wings and the areas around suspension mountings need regular checking. Rust in those places is structural. It's often hidden behind trim, underseal or old repairs, and we sometimes find a previous patch that was welded over rotten metal rather than cut out, which traps water and makes things worse. Cars from the 1980s and 1990s, now becoming modern classics, are particularly prone at the sills and rear arches.

Our approach is to inspect thoroughly, explain what we find and then repair properly. We cut back to sound metal, form new sections to match the original shape where pre-formed panels aren't available or don't fit, and weld them in neatly. Joints are seam sealed and primed, the repair is protected with underbody coating, and cavity wax goes into the enclosed sections. You get a written quote first, and we'll call before any extra work.

The drive from Raynes Park or down past the All England Club and on via Morden is around 20 minutes. For a car that isn't used much, or one with a dangerous defect, collection and delivery can be arranged. Repairs carry our 12-month workmanship warranty. If you'd like a pre-purchase underside check on an older car you're thinking of buying, we can do that too, which is often money well spent.

Welding & Rust Repair: what’s involved

Most cars have a monocoque body, meaning the shell itself acts as the chassis. Sills, floor pans, crossmembers and the areas around suspension and seat belt mountings carry load, so rust there weakens the car. Corrosion usually starts where water and road salt collect: inside sills, behind arch liners, along seams and around jacking points, and it often works from the inside out.

The MOT treats corrosion seriously. Excessive corrosion in load-bearing structure is a failure, particularly within 30cm of prescribed areas such as suspension, steering and seat belt mounting points. A proper repair means cutting back to sound metal, fitting a new steel section and welding it in, then sealing and protecting it inside and out. Covering rust with filler or a plate over rotten metal doesn't fix it, and a tester can fail an inadequate repair on a structural area.

From £80Written quote first
2 hours – 3 daysTypical time in the workshop
3 monthsWorkmanship warranty
4.9★193 Google reviews

Signs of rust that needs welding

Bubbling paint on sills or arches

Rust forming underneath the paint. It's usually more extensive than the visible bubbles suggest.

Holes or flaking metal underneath

Floor pans, sills, jacking points and crossmembers that flake or can be pushed through with a probe.

MOT advisory or failure for corrosion

An advisory is a warning worth acting on; a failure for structural corrosion must be repaired before the car can pass.

Soft or crumbling jacking points

If the sill crushes or the jack sinks into it, the structure around it is weakened.

Rust around suspension mountings

Corrosion near spring seats, strut tops, subframe or trailing arm mounts is structural and needs prompt repair.

Water in the footwells

Can be caused by holes in the floor, although blocked drains and door seals are more common causes, so we check.

Rust on door bottoms and boot floor

Often cosmetic rather than structural, but cheapest to repair while the rusted area is still small.

When should it be done?

Deal with structural rust as soon as it's found, ideally before the MOT so you have time to plan. Corrosion advisories are worth acting on, because another winter of salted roads can turn an advisory into a failure needing bigger repairs. Cosmetic rust on door bottoms or arch edges isn't a safety issue, but it's cheapest to fix while it's still at the bubbling stage. Older and classic cars benefit from a regular underside inspection.

  • MOT advisory mentioning corrosion: before the next winter or MOT
  • MOT failure for corrosion: before retest, and before driving at all if the defect was rated dangerous
  • Bubbling paint on sills, arches or door bottoms: while the rust is still small
  • Buying an older or classic car: underside inspection before or soon after purchase

How we repair rust and welding

  1. Inspection on the rampWe examine the underside, probe suspect areas and read any MOT failure sheet, separating structural corrosion from cosmetic.
  2. Written quoteWe explain what's structural, what's cosmetic and what should be prioritised. Rust sometimes proves more extensive once cut into, and we'll contact you before doing anything extra.
  3. Access and protectionTrim, arch liners, seats or carpets are removed as needed, and fuel lines, brake pipes and wiring are protected or moved away from heat.
  4. Cut out corrosionRusted metal is cut back until we reach clean, sound steel.
  5. Fabricate or fit repair sectionsNew steel sections are formed in the workshop, or pre-formed repair panels are used where available and a good fit.
  6. Weld inThe new metal is MIG welded in, seam welded where the structure requires it, and the welds are dressed back.
  7. Seal and protectJoints are seam sealed and primed, the underside is coated with underbody protection and enclosed sections are treated with cavity wax.
  8. Refit, check and hand overEverything is refitted, pipes and wiring are checked, and we explain what was repaired and anything else worth watching.

Steel and materials

Repairs are made with new steel of a suitable thickness for the area, either fabricated in the workshop or using pre-formed repair panels where they're available and fit well. After welding, joints are sealed, primed and protected with underbody coating, and enclosed sections such as sills are treated with cavity wax, which creeps into seams to slow future corrosion from the inside.

  • New steel sheet of the appropriate thickness
  • Pre-formed sill and arch repair panels where suitable
  • Weld-through primer and anti-corrosion primer
  • Seam sealer
  • Underbody protection and cavity wax

How long it takes

2 hours – 3 days

A single small MOT repair can often be done in 2–4 hours. Sills, floor sections or several areas can take 1–3 days, and extensive work on older cars longer. If the rust turns out to be worse once cut out, we'll call you before going further.

What’s included

  • Underside inspection and written quote
  • Cutting out corrosion back to sound metal
  • New steel welded in
  • Seam sealing, priming and underbody protection on the repair
  • Cavity wax in enclosed sections that have been repaired
  • 12-month workmanship warranty

From Wimbledon to our Hackbridge workshop

From Wimbledon town centre follow The Broadway (A219) east to South Wimbledon, then take the A24 Morden Road south to Morden. From Morden take St Helier Avenue (A297) to the Rose Hill roundabout, then Wrythe Lane (B278) through The Wrythe and on via Hackbridge Road (B277) into Hackbridge, joining London Road (A237) by Hackbridge station for Soho Mills.

Follow The Broadway to South Wimbledon, the A24 to Morden, then St Helier Avenue, Wrythe Lane and Hackbridge Road to London Road in Hackbridge, around 20 minutes. Collection from Wimbledon can be arranged.

Directions from Wimbledon

About Wimbledon

Wimbledon is an affluent south-west London suburb with two distinct centres: Wimbledon Village up on the hill by the Common, with its older houses, boutiques and restaurants, and the busier town centre down Wimbledon Hill Road around the station, The Broadway and the Centre Court Shopping Centre. Housing ranges from large Victorian and Edwardian houses in the Village and around the Common to terraces and modern flats towards South Wimbledon and Raynes Park. It is world-famous for The Championships at the All England Club, which transform local traffic for a fortnight each summer. Driving means steep hills, a busy town centre, bus-heavy main roads and extensive controlled parking.

Places nearby: All England Lawn Tennis and Croquet Club, Wimbledon Common, Wimbledon Windmill, Cannizaro Park, Wimbledon Park, Centre Court Shopping Centre

Postcodes: SW19, SW20 · London Borough of Merton

More about KITH for Wimbledon drivers

Welding & Rust Repair in Wimbledon: your questions answered

Can you put right a bad previous repair on my classic car?

Yes. Plates welded over rotten metal, or filler on structural areas, need cutting out and redoing properly. We'll inspect the old work and quote for replacing it with new steel welded to sound metal.

My car sits for weeks at a time. Is that bad for rust?

It can be. A car that stays parked doesn't warm up and dry out underneath, and a non-breathable cover can trap condensation. Regular runs and a breathable cover help, and cavity wax in the sills makes a real difference.

Can you collect a car that hasn't been driven for a while?

Yes, collection and delivery can be arranged. If the car has been off the road, let us know its condition when you book, so we can plan the right way to move it.

Will my car pass the MOT after welding?

We repair the items on your failure sheet to a standard that meets the MOT inspection requirements, although the tester makes the final decision at the retest. If we find other corrosion nearby that's likely to cause a problem, we'll point it out before the retest.

Is it worth welding an older car?

It depends on how much rust there is and what the car is worth. A couple of sill repairs on an otherwise sound car are usually worthwhile. Widespread corrosion across floors, sills and mountings can cost more than the car is worth, and we'll give you an honest view.

Can you just patch over the rust?

Not on structural areas. Welding a plate over rotten metal traps moisture so the rust carries on underneath, and a tester can fail it as an inadequate repair. We cut out to sound metal and weld in new steel.

What's the difference between structural and cosmetic rust?

Structural rust affects load-bearing parts such as sills, floors, crossmembers, chassis legs and the areas around suspension and seat belt mountings. Cosmetic rust is on outer panels like door skins and bolt-on wings, which aren't load-bearing and usually only fail an MOT if they leave sharp edges.

How can I slow down rust?

Rinse the underside during winter to remove road salt, keep door and sill drain holes clear, and deal with stone chips early. On older cars, cavity wax in the sills and underbody protection make a real difference, and we can apply them.

Price your welding and rust repair now

Enter your reg and we’ll look up your car and price the job from our own labour rates and the book time for your model. Then book it in with a fixed written quote before any work starts.

  • Free, about 30 seconds, no sign-up
  • Parts, labour and VAT included
  • 12-month workmanship warranty
  • Collection from Wimbledon can be arranged
“It’s rare to find a garage you can truly trust. Fair price, brilliant customer service.”Thinushan K. · ★★★★★ Google

Prefer to talk? Call 020 4629 9469 or WhatsApp us.

Loading instant quote…
Chat on WhatsApp