Welding and Rust Repairs for Wallington Cars, 6 Minutes Away

Wallington is one of the closest areas to us, and for a welding repair that needs the car for a day or two, being a few minutes away makes things easy. Our workshop is about 6 minutes from Wallington, straight up London Road into Hackbridge.

  • ★★★★★ 4.9/5 from 193 Google reviews
  • ~6 min from Wallington
  • Mon–Fri 8am–8pm · Sat 8am–5pm
Car raised on the ramp for underbody inspection at KITH Cars Garage & Bodyworks, Hackbridge

Planning a rust repair around the Wallington school run

For many Wallington households, the car is part of a tight weekday routine: the school run to one of the big schools, the commute from Wallington station, then shopping. That makes it tempting to put off an MOT corrosion advisory. But advisories on sills and floors tend to grow into failures over a winter, and the best time to deal with one is when you can choose the dates, rather than being forced to when the car fails its test the week the certificate expires.

Family estates and SUVs around Mellows Park and the roads off Boundary Road and Park Lane tend to rust in predictable places: sills, rear arches and the floor under the boot where the spare wheel well can collect water. Older runabouts kept as a second car are also common here, and they often sit for days between trips, which keeps them damp underneath. Queues at Wallington Green mean short, slow journeys that never dry things out.

Because we're so close, you can drop the car in on your way to the station and collect it later, or we can collect and deliver. On the ramp we check the underside and give you a written quote that separates the MOT-critical items from the ones that can wait. Corroded steel is cut out, new metal is welded in, and the repair is sealed, primed and coated, with cavity wax inside the sills.

If we open up a sill and find the rust goes further than expected, we'll ring before we do any more. Most smaller repairs are done within the day. The work is covered by our 12-month workmanship warranty, and we'll point out anything else worth watching before the next test. If you live nearer the Town Hall end of Woodcote Road, collection and delivery may be easier than walking back.

Welding & Rust Repair: what’s involved

Most cars have a monocoque body, meaning the shell itself acts as the chassis. Sills, floor pans, crossmembers and the areas around suspension and seat belt mountings carry load, so rust there weakens the car. Corrosion usually starts where water and road salt collect: inside sills, behind arch liners, along seams and around jacking points, and it often works from the inside out.

The MOT treats corrosion seriously. Excessive corrosion in load-bearing structure is a failure, particularly within 30cm of prescribed areas such as suspension, steering and seat belt mounting points. A proper repair means cutting back to sound metal, fitting a new steel section and welding it in, then sealing and protecting it inside and out. Covering rust with filler or a plate over rotten metal doesn't fix it, and a tester can fail an inadequate repair on a structural area.

From £80Written quote first
2 hours – 3 daysTypical time in the workshop
3 monthsWorkmanship warranty
4.9★193 Google reviews

Signs of rust that needs welding

Bubbling paint on sills or arches

Rust forming underneath the paint. It's usually more extensive than the visible bubbles suggest.

Holes or flaking metal underneath

Floor pans, sills, jacking points and crossmembers that flake or can be pushed through with a probe.

MOT advisory or failure for corrosion

An advisory is a warning worth acting on; a failure for structural corrosion must be repaired before the car can pass.

Soft or crumbling jacking points

If the sill crushes or the jack sinks into it, the structure around it is weakened.

Rust around suspension mountings

Corrosion near spring seats, strut tops, subframe or trailing arm mounts is structural and needs prompt repair.

Water in the footwells

Can be caused by holes in the floor, although blocked drains and door seals are more common causes, so we check.

Rust on door bottoms and boot floor

Often cosmetic rather than structural, but cheapest to repair while the rusted area is still small.

When should it be done?

Deal with structural rust as soon as it's found, ideally before the MOT so you have time to plan. Corrosion advisories are worth acting on, because another winter of salted roads can turn an advisory into a failure needing bigger repairs. Cosmetic rust on door bottoms or arch edges isn't a safety issue, but it's cheapest to fix while it's still at the bubbling stage. Older and classic cars benefit from a regular underside inspection.

  • MOT advisory mentioning corrosion: before the next winter or MOT
  • MOT failure for corrosion: before retest, and before driving at all if the defect was rated dangerous
  • Bubbling paint on sills, arches or door bottoms: while the rust is still small
  • Buying an older or classic car: underside inspection before or soon after purchase

How we repair rust and welding

  1. Inspection on the rampWe examine the underside, probe suspect areas and read any MOT failure sheet, separating structural corrosion from cosmetic.
  2. Written quoteWe explain what's structural, what's cosmetic and what should be prioritised. Rust sometimes proves more extensive once cut into, and we'll contact you before doing anything extra.
  3. Access and protectionTrim, arch liners, seats or carpets are removed as needed, and fuel lines, brake pipes and wiring are protected or moved away from heat.
  4. Cut out corrosionRusted metal is cut back until we reach clean, sound steel.
  5. Fabricate or fit repair sectionsNew steel sections are formed in the workshop, or pre-formed repair panels are used where available and a good fit.
  6. Weld inThe new metal is MIG welded in, seam welded where the structure requires it, and the welds are dressed back.
  7. Seal and protectJoints are seam sealed and primed, the underside is coated with underbody protection and enclosed sections are treated with cavity wax.
  8. Refit, check and hand overEverything is refitted, pipes and wiring are checked, and we explain what was repaired and anything else worth watching.

Steel and materials

Repairs are made with new steel of a suitable thickness for the area, either fabricated in the workshop or using pre-formed repair panels where they're available and fit well. After welding, joints are sealed, primed and protected with underbody coating, and enclosed sections such as sills are treated with cavity wax, which creeps into seams to slow future corrosion from the inside.

  • New steel sheet of the appropriate thickness
  • Pre-formed sill and arch repair panels where suitable
  • Weld-through primer and anti-corrosion primer
  • Seam sealer
  • Underbody protection and cavity wax

How long it takes

2 hours – 3 days

A single small MOT repair can often be done in 2–4 hours. Sills, floor sections or several areas can take 1–3 days, and extensive work on older cars longer. If the rust turns out to be worse once cut out, we'll call you before going further.

What’s included

  • Underside inspection and written quote
  • Cutting out corrosion back to sound metal
  • New steel welded in
  • Seam sealing, priming and underbody protection on the repair
  • Cavity wax in enclosed sections that have been repaired
  • 12-month workmanship warranty

From Wallington to our Hackbridge workshop

From Wallington town centre, head north on Woodcote Road (A237) past the station onto Manor Road, cross the A232 at Wallington Green and continue straight along London Road (A237) to Hackbridge. Soho Mills is on London Road near Hackbridge station.

Head north on Woodcote Road past the station onto Manor Road, cross the A232 at Wallington Green and continue along London Road to Soho Mills, about 6 minutes. It's an easy walk back, or we can collect.

Directions from Wallington

About Wallington

Wallington is a settled residential suburb in the east of the London Borough of Sutton, with a compact town centre around Woodcote Road, Stafford Road and Manor Road. Housing is mostly Victorian, Edwardian and interwar semis and terraces, with flats near the station and the rebuilt Roundshaw estate to the south on the former Croydon Airport site. It is popular with families, helped by well-known grammar schools, and commuters using Wallington station. Driving is generally straightforward, though the town centre and school streets get busy at peak times.

Places nearby: Wallington Town Hall, Wallington Green, Holy Trinity Church, Beddington Park, Wallington Square, Wallington station

Postcodes: SM6 · London Borough of Sutton

More about KITH for Wallington drivers

Welding & Rust Repair in Wallington: your questions answered

Can I drop my car off before the school run and walk home?

Yes, the workshop is a short drive up London Road, and walking back to Wallington is realistic. Hackbridge station is also next to us. We'll call with the quote before starting any work.

Should I fix a corrosion advisory now or wait for the MOT?

Fixing it before the test is usually better. You can choose when to be without the car, and the repair is often smaller than it would be after another winter. Waiting risks a failure close to your certificate expiring.

What does 'excessive corrosion' on my MOT mean?

It means the tester found rust that has weakened a load-bearing area, such as a sill, floor or mounting. We'll inspect it, explain how bad it is and quote for cutting it out and welding in new steel.

Will my car pass the MOT after welding?

We repair the items on your failure sheet to a standard that meets the MOT inspection requirements, although the tester makes the final decision at the retest. If we find other corrosion nearby that's likely to cause a problem, we'll point it out before the retest.

Is it worth welding an older car?

It depends on how much rust there is and what the car is worth. A couple of sill repairs on an otherwise sound car are usually worthwhile. Widespread corrosion across floors, sills and mountings can cost more than the car is worth, and we'll give you an honest view.

Can you just patch over the rust?

Not on structural areas. Welding a plate over rotten metal traps moisture so the rust carries on underneath, and a tester can fail it as an inadequate repair. We cut out to sound metal and weld in new steel.

What's the difference between structural and cosmetic rust?

Structural rust affects load-bearing parts such as sills, floors, crossmembers, chassis legs and the areas around suspension and seat belt mountings. Cosmetic rust is on outer panels like door skins and bolt-on wings, which aren't load-bearing and usually only fail an MOT if they leave sharp edges.

How can I slow down rust?

Rinse the underside during winter to remove road salt, keep door and sill drain holes clear, and deal with stone chips early. On older cars, cavity wax in the sills and underbody protection make a real difference, and we can apply them.

Price your welding and rust repair now

Enter your reg and we’ll look up your car and price the job from our own labour rates and the book time for your model. Then book it in with a fixed written quote before any work starts.

  • Free, about 30 seconds, no sign-up
  • Parts, labour and VAT included
  • 12-month workmanship warranty
  • Collection from Wallington can be arranged
“It’s rare to find a garage you can truly trust. Fair price, brilliant customer service.”Thinushan K. · ★★★★★ Google

Prefer to talk? Call 020 4629 9469 or WhatsApp us.

Loading instant quote…
Chat on WhatsApp